Commercial Electrician Melbourne
- No Obligation FREE Quotes
- Fully Insured & Licensed Electricians
- Operating for Over 10 Years
- 24/7 on Call Services
Looking for a commercial electrician in Melbourne you can actually rely on? J3T Electrical has been doing commercial electrical work across Melbourne for over 10 years. We are a Registered Electrical Contractor (REC), fully insured, and all our sparks are A-grade licensed. Whether you need a full shop fit-out wired from scratch, a switchboard upgrade in an older office building, or a CCTV system installed before you open next week, we have the experience and the gear to get it done right.
We work with cafes, retail shops, offices, restaurants, government buildings, non-profits, and builders across every suburb in Melbourne. Our commercial electrician services cover everything from three-phase power installations to emergency lighting compliance testing. No job is too small, no compliance requirement too fiddly.
Every commercial property is different. A cafe in Fitzroy has different wiring needs to a government office in Parkville or a warehouse in Footscray. We get that – and we will give you honest advice on exactly what your premises needs.
Our Commercial Electrical Services
As a commercial electrician in Melbourne, we deliver electrical solutions for retail, hospitality, office, government, and industrial properties across Melbourne and regional Victoria.
Fit-outs & Installations
Shop Fit-outs
Opening a new retail space or refreshing an existing one? We handle the full electrical scope for shop fit-outs — from feature lighting and power points to signage wiring and security systems. We work with your shopfitter or builder to make sure the electrical is done on schedule and passes inspection first time.
Office Tenancies & Fit-outs
Moving into a new office tenancy usually means the existing electrical won't suit your layout. We rewire, add circuits, install data points, and set up lighting to match your floor plan. For larger fit-outs, we coordinate staged power shutdowns without disrupting other tenants. Need a switchboard upgrade too? We handle that as well.
Cafe, Restaurant & Bar Fit-outs
Hospitality fit-outs have specific requirements that general electricians can miss. Three-phase power for commercial kitchens, dedicated circuits for coolrooms and dishwashers, compliant emergency and exit lighting, and feature lighting that sets the right mood. We know the BCA requirements for hospitality venues and make sure your electrical is compliant before council inspection.
Non-Profit Organisations
We work with non-profits and community organisations across Melbourne. Whether you're fitting out a new community space, upgrading older wiring, or need ongoing electrical maintenance on a budget, we can help. Non-profits are often working with limited funds, so we give honest advice on what needs doing now versus what can wait.
Government Bodies
Government buildings have strict compliance requirements and often need security clearances for contractors. J3T Electrical holds all necessary licences and insurance to work on government properties. We provide detailed documentation, compliance certificates, and can schedule work outside business hours to avoid disrupting operations.
Builders & Developers
Need a reliable commercial electrician in Melbourne? We take on projects from initial rough-in through to final fit-off and certification. We've worked on multi-unit commercial developments, retail strips, and mixed-use buildings. We show up on time, keep to your programme, and handle all certification and compliance paperwork.
Security, Data & Communications
CCTV & Security Camera Installation
We install commercial-grade CCTV systems with remote viewing so you can check your cameras from your phone. We handle the cabling, power supply, and mounting — whether you need a couple of cameras covering your shopfront or a full multi-camera system across a larger premises. Protects your stock, your staff, and gives you evidence if something goes wrong.
Security Alarms
We install and maintain commercial security alarm systems that meet Australian standards. This includes back-to-base monitored alarms, sensor placement, keypad and access control setup, and integration with your existing CCTV. If your current alarm system is outdated or playing up, we can assess whether a repair or full replacement makes more sense.
Security Lighting
Good exterior lighting is one of the most effective deterrents against break-ins. We install sensor-activated floodlights, perimeter lighting, and car park lighting for commercial properties. All installations comply with AS/NZS 1158 for outdoor lighting. We also do LED upgrades on older security lighting to reduce your power bills without losing brightness.
Intercom, Data & Telephone
Need a new intercom system for your office building? Data cabling for a server room? Phone points relocated after an office rearrangement? We handle it all. We install structured cabling systems (Cat6/Cat6a) for offices, retail spaces, and commercial buildings, plus audio or video intercom systems for building entry and internal communication.
Data & Fibre Optic Cabling
Slow network speeds are often a cabling problem, not an internet problem. We install and certify data cabling and fibre optic runs for commercial premises. Whether you need a few data points added to an existing office or a full structured cabling install for a new tenancy, we test and certify every connection to make sure it performs to spec.
Power, Lighting & Energy
Power & Lighting Solutions
From adding extra power points in a workshop to designing the full lighting layout for a new commercial space, we handle power and lighting for all types of business premises. We work with LED systems and commercial-grade fittings, and can design layouts that meet AS/NZS 1680 for workplace illumination.
Exit & Emergency Lighting
Exit and emergency lighting is a legal requirement under AS 2293 and needs testing every six months. We install, repair, and service emergency and exit lighting for offices, retail, hospitality, and industrial buildings. We can bring you up to compliance and put you on a regular test and tagging schedule so you never fall behind.
Energy Saving Solutions
Power bills are one of the biggest overheads for Melbourne businesses. We can audit your current electrical setup and identify where you're wasting money. Common wins include switching to LED lighting, installing timers and sensors, upgrading old switchboards, and balancing your three-phase supply. We give you the numbers upfront so you can see the payback period.
Three-Phase Power Installation
If your business runs heavy equipment — commercial ovens, compressors, large air conditioning units, or industrial machinery — you likely need three-phase power. We handle new installations, upgrades from single-phase, and connections for three-phase appliances. This includes the application to your electricity distributor, meter panel work, and all wiring through to your equipment.
Three-Phase Appliance Installation
Got a new three-phase appliance that needs connecting? Whether it's a commercial oven, a large air conditioning system, or workshop machinery, we wire it in to your existing three-phase supply safely and to code. We check your switchboard capacity first to make sure it can handle the additional load before starting.
Maintenance & Emergency
Fault Finding & Repairs
Tripping circuits, flickering lights, dead power points — electrical faults in a commercial property can shut down your business. Our electricians carry testing equipment to trace the problem without ripping out walls or guessing. If the fault is in your switchboard, we can repair or replace it on the spot in most cases.
Electrical Maintenance
Regular maintenance prevents expensive breakdowns and keeps your property compliant. We offer scheduled maintenance including switchboard inspections, thermal imaging to detect hot spots, emergency lighting checks, and general electrical health assessments. Managing multiple properties? We can set up an electrical maintenance schedule that covers all of them.
Test & Tagging
Test and tagging is a workplace safety requirement under AS/NZS 3760. We test and tag portable electrical appliances across your workplace — everything from computers and kettles to power tools and extension leads. We provide a full report and tagging record for your compliance files.
24/7 Emergency Callout
Electrical emergencies don't wait until business hours. If your business has lost power, has an exposed wiring issue, or any other electrical emergency, our emergency electrician team is available around the clock. We service all of Melbourne and can usually be on site within the hour.
Switchboard Upgrades
Old ceramic fuse boards and undersized switchboards are a common problem in Melbourne's older commercial buildings. If your switchboard is tripping regularly, can't handle your current load, or still has rewirable fuses, it needs upgrading. We replace old switchboards with modern safety switch-equipped boards that meet current Australian standards. Full switchboard upgrades for commercial properties of all sizes.
As your electrician in Melbourne, We also provide residential electrician services for homes and industrial electrician services for factories and warehouses across Melbourne.
Why Choose J3T ELECTRICAL?
Reliable & Trustworthy
We focus on customer satisfaction and transparency to build lasting relationships with all our clients.
Fully Insured & Licensed Electricians
As fully licensed and certified electricians, we’ll handle all your projects with professionalism and care with our fully licensed and certified electricians.
Operating for 10+ Years
No matter the size or complexity, we bring 10 years of knowledge and expertise to every project.
24/7 On-Call Services
We offer 24/7 emergency electrical services, so you’re never left in the dark.
Servicing All of Victoria
From Melbourne to regional areas, we proudly provide high-quality electrical services to homes and businesses throughout Victoria.
Contact Our Commerical Electricians Today!
Looking for a reliable commercial electrician in Melbourne and Victoria? Reach out to us today to get started with a free, no-obligation quote! J3t Electrical knows how to handle all your commercial needs, from custom lighting installations to energy-efficient solutions and CCTV security.
FAQs
The most common signs are circuits tripping regularly, not having enough capacity for new equipment, or your switchboard still having old ceramic rewirable fuses instead of modern circuit breakers and safety switches. If your building was built before the 1990s and the switchboard has not been replaced, it is almost certainly due for an upgrade. A new switchboard will handle your current electrical load safely and bring you up to the current Australian Wiring Rules (AS/NZS 3000). We can inspect your switchboard and tell you whether it needs a full switchboard upgrade or if a smaller repair will sort it out.
Under AS 2293.2, emergency and exit lighting in commercial buildings must be tested every six months (a full discharge test) and inspected monthly (a brief visual check). The six-monthly test involves running the emergency lighting on battery power for 90 minutes to confirm it still works if the mains power fails. Many business owners are not aware of this requirement until they get flagged in a council inspection or an insurance audit. We can handle thetesting and tagging for your premises, including all the record-keeping.
Our commercial electrical services cover all of Melbourne and extend into regional Victoria for larger projects. Our electricians regularly work across the inner suburbs – Richmond, Fitzroy, Carlton, South Yarra, St Kilda – as well as the western suburbs like Footscray and Spotswood, the northern suburbs including Coburg, Brunswick, Preston, and Epping, and the eastern suburbs like Kew, Camberwell, and Hawthorn. We cover all the areas across Melbourne and beyond.
